41
If you hear a repetitive trouble alarm when
you try to arm the system, and it does not
arm.
Check the Console’s display. If a door or
window is open, its zone # will indicate
there’s a PROBLEM.
• Press
DISARM
. Check each Door/
Window Sensor is working properly and
that no doors or windows are open.
Then arm the system.
Or:
• While the trouble alarm is sounding,
press
CLEAR
on the Console
to
bypass the problem zone (the display
shows that it has been BYPASSED).
Then arm the system again.
• Or if the display shows TAMPER, check
the cover on the Door/ Window Sensor
for that zone.
• Or check that the upper right lid on the
Console it closed.
If the alarm trips when you enter the
house before you have time to disarm it.
Arm the system in the AWAY mode.
• Be sure you set the correct SECURITY
LIGHT Code in the Console, see pages
26 and 35.
• Be sure the light you are trying to
control has its on/off switch in the on
position. Be sure its bulb is good.
• Plug the Module into another outlet
near the Console.
• Check that the indicator on the Remote
comes on when you press a button.
Replace batteries and re-register
remote if necessary.
• Check the dials on the Modules.
Lights will not turn on or off from the
ON
or
OFF
buttons on the Keychain Remote.
PROBLEM
SOLUTION
Troubleshooting