20
Main Menu
Antenna Power
The PVR-3690 can power a 5V active antenna. By default this
functionality is disabled to prevent damaging standard passive antennas
and masthead amplifiers.
Active antennas are commonly used in boats, caravans and recreational
vehicles. A standard home installation with a passive antenna should not
require this setting to be activated.
Enabling Active 5VDC Antenna:
Navigate (page 16) to the
Installation
sub-menu and highlight
Antenna
Power
. Press
OK
(
1
36
) to open the
Antenna Power
sub-menu.
Use
(
1
37
) buttons to select off or on.
Press the
RED
(
1
40
) button to accept the change, or press the
BLUE
(
1
43
)
button to cancel.
2
1
3
!
Initialise STB
Initialising the PVR will wipe all of the channels and user settings, restoring
the set top to a factory default state.
Initialising The STB:
Navigate (page 16) to the
Installation
sub-menu and highlight
Initialise
STB
. Press
OK
(
1
36
) to open the
Enter Pin Code
sub-menu.
Use 0 ~9 (
1
27
) buttons to enter the Pin code (default 0000).
If the Pin code is incorrect you will be provided with the chance to enter it
again. If the Pin code is correct, the STB will initialise and reboot.
2
1
!
Summary of Contents for PVR-3690
Page 48: ...NOTES ...
Page 49: ...NOTES ...