Nextar Q4-01, Hardware Instruction Manual

Page: 36 / 87

9
8. Next—
-
Tap GO to calculate the route and start the turn-by-turn instructions.
—Or—
-
Tap SAVE & GO to save the destination location in the Favorites list before
receiving turn-by-turn instructions. The system will prompt you to enter a
location name. The system will then provide turn-by-turn instructions to that
destination from your current location.
—Or—
-
Tap SET ORIGIN to set this location as the starting position, e.g., to plan a
route using a different starting point.
Setting a Destination Using a Point of Interest
(POI)
To set a destination using a point of interest
1. From the the main screen, tap GO TO. The Enter Destination screen opens.
2. If necessary, tap the POI tab.
3. Select an option to locate a POI as follows—
-
POI BY CITY —to locate a POI by entering the city location, and then the
POI name
-
POI BY NAME —to locate a POI by entering the POI name
-
POI NEAR VEHICLE —to locate a POI that is close to your current vehicle
position
-
POI NEAR DESTINATION —to locate a POI that is close to your destination
For this example, select POI BY CITY .
4. Select a POI category (restaurants, gas stations, Bank/ATM). You may use the Up
or Down buttons to scroll up and down the list of categories. After you choose a
category, the data entry screen appears next and prompts you for the first item to
enter.
5. Begin spelling out the item as prompted by tapping out the city name starting with
the first letter. As you make selections, the screen displays and highlights the most
likely characters based on the GPS’s patentent technology.