ASSEMBLY - LAs15(A) | Dolly
Stacking LAs15(A) on a Dolly
1 -
Place the dolly on a flat surface and unlock the sliding
lock plate by pulling the four side levers.
2 -
Put the LAs15(A) on top of the dolly and be sure it
perfectly fits it. Lock the sliding pins, pushing it inwards
onto subwoofer’s direction.
3 -
Place another LAs15(A) on top of the assembled system
and be sure it perfectly fits in place.
4 -
Raise the four sliding rigging arms into the new LAs15(A).
Insert four lock pins, one on each arm, on the upper cabinet
For stacking purposes only four pins are needed. However,
the other four can be also be installed. In that case slightly
raise the top subwoofer while inserting the lock pin.
ATTENTION:
The maximum limit for dolly stacking is 2 x
LAs15(A). Stacking on the floor, the maximum limit is 4 x
LAs15(A)
18
www.next-proaudio.com
STACKING PROCEDURES
step 1
step 4
step 2-3
Sliding lock plate
Unlocking lever
