16
www.next-proaudio.com
RIGGING PROCEDURES
ASSEMBLY - LAs15(A) | LA26 | FLYING
ADAPTER BETWEEN LA26 AND LAs15(A)
1 -
Lift the LAs15(A) array (refer to page 15).
2 -
Install the flying adapter onto the LA26’s rear swivel arm.
Secure it with two lock pins.
3 -
Lower the subwoofer array up to a comfortable position to
attach the LA26 cabinet.
4 -
Raise the LA26 and insert both rigging arms, front and back
(flying adapter rigging arms), into the LAs15(A) rigging slots.
Secure it with four lock pins, two at the front and two at the
back sides.
5 -
Continue the array assembly, the additional LA26 must be
connected one by one.
ATTENTION:
The maximum limit is 6 x LA26. For bigger
Arrays please use the Flying Frame between the LAs15(A) and
LA26.
step 2
step 3-4
A
C
