11
RIGGING/TRANSPORT
www.next-proaudio.com
LA26 Rigging System
LA26 features a three-point rigging system composed of a rigging
swivel arm at the back and a pair of rigid rigging hardware at the front
sides. The inter-cabinet connection is ensured by fitting the “male”
parts (blue circles) of the hardware into the next cabinet’s “female”
parts (yellow circles). There are two screws at the speaker’s sides to
attach a U-Bracket (pink circles).
LAs15/LAs15A Rigging System
LAs15/LAs15A features a four-point rigging system composed of two
pairs of rigging sliding arms, two at the back sides and a pair at the
front sides. The inter-cabinet connection is ensured by fitting the
“male” parts (blue circles) of the hardware into the next cabinet’s
“female” parts (yellow circles).
Flying Frame for LA26
The flying frame is the device that allows to rig LA26 or LAs15/LAs15A.
It is compatible with both 3-point and 4-point rigging systems. The
frame has two sliding rigging shackles at the central bar and two
safety schakles. This device can also stack LA26, using the ground
stack accessory, or LAs15/LAs15A using the four swivel arms (yellow
circles). It is also possible to attach a LAP-TEQ clinometer (green circle).
Weight: 18.2kg
Flying Adapter between LA26 and LAs15(A)
The flying adapter is the device that allows to rig LA26 right after a
LAs15/LAs15A without any further hardware. It results in a clean visual
for the system seen from the front. This device has two connection
points, at the sides, to connect to the LAs15/LAs15A rear rigging
points (yellow circles). At the center, there are two rigging points
where the LA26 swivel arm will fit (blue circles).
Ground Stack Sub Adapter for LA26
The ground stack sub adapter is the device that allows to stack LA26
right on top of a LAs15/LAs15A without any further hardware. It results
in a clean visual for the system. This device has two connection points,
at the sides, to connect to the LAs15/LAs15A rear rigging points (blue
circles). At the center, there are four stacking points (0º, 2º, 4º, 6º)
where the LA26 rigging hardware will fit (yellow circle).
Front Rigging Point
LAs15(A) Rear Rigging
Point
LA26 Rear Rigging
Point
