PARTS:
• • 2 x M8 20mm Low Profile Bolts
• • 2 x Steel Seat Spacers
PARTS:
• • 2 x M8 20mm Low Profile Bolts
• • 2 x Steel Seat Spacers
03
Align the Steel Seat Spacers with the T-Nuts installed on the desired cockpit. Align the rear Seat Slider
holes with the Steel Seat Spacers. Bolt through and secure with 2 x M8 Low Profile Bolts.
PARTS:
• • NIL
02
Lift the Seat Slider Lever up and slide the Seat rails all the way back to access the rear mounting holes
on the Seat Slider.
04
Slide the seat all the way back to access the front mounting holes. Align the front mounting holes on the Seat
Slider with the T-Nuts in the front 4040 extrusion. Place Steel Seat Spacer between the 4040 extrusion and the
Seat Slider. Bolt through and secure with 2 x M8 Low Profile Bolts.
10
