Nexo NXAMP4X1, User Manual

Page: 42 / 140

MENU DESCRIPTION
MENU DESCRIPTION
The diagram bellow shows the internal structure of the menus accessible by the user from
the front panel. Follow the arrow corresponding to the “A” or “B” button for each menu to
enter the next one.
NXAMP Startup
Choose Cabinet Setup
Default Display Volume Delays Gains
Options
Array EQ
1.Systm Config
4.Security
3.Save/Recall
2.Input Patch
5.GPIO Mode
6.Load Monitor
7.Miscellaneous
A+B pressed
A A A A A
A
Nothing pressed
B B B B B
Headroom
A B
B
Default display is the display of the current setup number (each setup has a unique
number inside for each LOAD revision) and setup name (see picture bellow). After two
minutes of inactivity, the display will go back to the default display.
0. FLAT - NO PROTN.
[4 ch amplifier] ~
~
If the current setup does not match any of the provided NEXO setup (i.e. the NXAMP is
running a custom setup) the default display will show the ca binet selection for each
channel.
If a NXDT104 card is fitted into the expansion slot of the NXAMP, then the Dante Id of this
unit will be also displayed in the default screen.
PAGE 42 OF 140