﹡﹡﹡
IMPORTANT NOTICE:
DO NOT return to place of purchase!!!
Please contact Customer Service hotline at 800-913-8999 for help
SAFETY CHECKS
ALWAYS CHECK THE FOLLOWING CONNECTIONS
STEP 1
1. Check connection of regulator to the propane tank
STEP 1
connection. Remember, the POL adapter is a left hand
thread
8
9
6
7
2
1
3
STEP 2
2. Check all connections on the hose regulator assembly
3. Check the intake pipe to make certain that
it is not kinked or in a position that could cause it to
kink hand tighted and than make a 1/2 turn with
the adjustable wrench
NOTE:
The remaining connections are to be
Tested after the heater has been lit
(SEE LIGHTING INSTRUCTIONS)
STEP 2
4.Light the heater following instructions on page 10
and page 11.
5. Using spray bottle with soapy water, spray each of
the areas listed below to visually inspect for leaks.
leaks will be indicated by bubbles.
6. Check intake pipe fitting at the bottom of safety
control valve.
7. Check pilot tubing to safety control valve
8. Check orifice fitting and the safety control valve
9. Check pilot tubing and pilot
NOTE:
After leak testing is completed
and all leaks are sealed , close the door to
the tank enclosure and your patio heater
is ready to use.
Page 9
