CAUTION
1.
Keep outdoor cooking gas appliance area clear and
free from combustible materials, gasoline and other
flammable vapours and liquids.
2.
Do not obstruct the flow of combustible and ventilation
air.
3.
Keep the ventilation openings of the cylinder enclosure
free and clear from debris.
Warning: If you wish to replace main burner, we
strongly recommend that you hire a professionally
trained technician to replace it. Please understand that
we will not be responsible for any liability, personal
injury, or property damage resulting from an
improperly assembled burner.
HOW TO REMOVE MAIN BURNER
Remove the main burner “R” pin on the back wall of fire box
by using needle nose pliers. Use a Phillips head screwdriver
to remove burner pin screw, then remove the burner on the
front wall of fire box, as shown below.
HOW TO REPLACE MAIN BURNER
Secure the burner pin screw. Insert the burner onto the orifice,
as shown below.
Make sure burner opening is engaged onto the orifice.
Secure the main burner on the back wall of fire box with “R”
pin.
HOTPLATE SURFACE
To clean your hotplate following each use, gently scrape any
remaining food residue with a spatula and wipe with a towel.
To remove stuck food, pour hot water onto hotplate surface to
loosen residue or use ¼ cup of table salt to act as an
abrasive. Next, follow steps for “SEASONING YOUR
HOTPLATE” on page 10.
BURNERS
Extreme care should be taken when moving a burner as it
must be correctly centered on the orifice before any attempt
is made to relight the barbeque. Frequency of cleaning will
depend on how often you use the barbeque.
BURNER CLEANING
Ensure the gas supply is off and the knobs are in the “
○
”
position. Make sure the appliance is cool. Clean the exterior
of the burner with a wire brush. Clear stubborn scale with a
metal scraper. Clear any clogged ports with a straightened
paper clip. Never use a wooden toothpick as it may break off
and clog the port. Please note if insects or other obstructions
are blocking the flow of gas through the burner, and if so you
will need to contact your Barbeques Galore local store on
1800 978 555 for after sales service and support.
GREASE CUP CLEANING
The grease cup should be emptied after each use and
washed with a mild detergent and warm water solution.
Check the grease cup frequently, do not allow excess grease
to accumulate and overflow out of the grease cup.
Care and Maintenance
12
†
3M is a registered trademark of 3M Company.
Summary of Contents for 720-0786D
Page 19: ...19 Exploded View ...
