30
1. Remove the cover of the rear burner by unfastening the screws in the firebox. Use another hand to
hold the orifice cover to ensure it doesn’t fall
.
Install burner orifice
2. Use a pair of pliers to keep the orifice holder from moving and use a 6mm wrench to unscrew and
remove the orifice.
3. Replace the orifice for LP gas with an orifice for NG. After the orifice is replaced, put the cover of the
rear burner back to its original location.
CARE AND MAINTENANCE
Stainless Steel
There are many stainless steel cleaners available. Always use the mildest cleaning process first,
scrubbing in the direction of the grain. Do not use steel wool as it will scratch the surface. To touch up
noticeable scratches in the stainless steel, sand very lightly with dry 100 grit sand paper in the direction of
the grain.
Grease specks can gather and bake onto the surfaces of the stainless steel, giving the appearance of rust.
For removal, use an abrasive pad with a stainless steel cleaner.
Cooking Grates
The easiest way to clean the grill is immediately after cooking is completed and the flames have been
turned off.
Figure 338
CSA International
Project 2075516
31 of 38
