Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
29
PEAK 887VL2 User Manual
Chapter 3: BIOS Setup
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Port 1
Hot Plug
External SATA
SATA Device Type
Spin Up Device
Serial ATA Port 2
Software Preserve
Port 2
Hot Plug
External SATA
SATA Device Type
Spin Up Device
Serial ATA Port 3
Software Preserve
Port 3
Hot Plug
External SATA
SATA Device Type
Spin Up Device
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Drive]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Drive]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Drive]
[Disabled]
SATA Configuration
This section is used to configure the SATA drives.
SATA Controller(s)
Enables or disables the SATA controller.
SATA Mode Selection
Configures the SATA mode.
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI
This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
SATA Controller Speed
Configures the speed of the SATA controller.
Aggressive LPM Support
Enables or disables aggressive LPM support.
Port 0 to Port 3
Enables or disables SATA port 0 to port 3.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable SATA Device.
SATA Controller(s)
SATA Mode Selection
SATA Controller Speed
Aggressive LPM Support
Software Feature Mask Configuration
Serial ATA Port 0
Software Preserve
Port 0
Hot Plug
External SATA
SATA Device Type
Spin Up Device
Serial ATA Port 1
Software Preserve
Port 1
Hot Plug
External SATA
SATA Device Type
Spin Up Device
Serial ATA Port 2
Software Preserve
Port 2
Hot Plug
External SATA
[Enabled]
[AHCI]
[Gen2]
[Enabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Drive]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
[Hard Disk Drive]
[Disabled]
Empty
Unknown
[Enabled]
[Disabled]
[Disabled]
▲
▲
▼
▼