Nexcom NSA7150 User Manual Download

Page: 112 / 152

NSA 7150/7150A User Manual

Chapter 4: BIOS Setup

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Selects 1LM or 2LM mode

for volatile memory. For 2LM

memory mode, BIOS will try to

configure 2LM but if BIOS is

unable to configure 2LM, volatile

memory mode will fall

Volatile Memory Mode

AppDirect cache

eADR Support

Server Mgmt

Advanced

Platform Configuration

Socket Configuration

Main

[2LM]

[Disabled]

[Disable]

Memory Map

Volatile Memory Mode

Configures 1LM or 2LM mode for volatile memory. For 2LM memory mode,
BIOS will try to configure 2LM but if BIOS is unable to configure 2LM, volatile
memory mode will fall.

AppDirect cache

Enables or disables AppDirect cache.

eADR Support

Enables or disables eADR support.

Summary of Contents for NSA7150
























































































































































Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands

Nexcom NSA7150, User Manual

Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands