Nexcom NSA7150 User Manual Download

Page: 145 / 152

129

NSA 7150/7150A User Manual

Chapter 4: BIOS Setup

→←: Select Screen

↑↓: Select Item

Enter: Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

Enable/Disable Intel

Virtualization Technology for

Directed I/O (VT-d) by reporting

the I/O device assignment to

VMM through DMAR ACPI

Tables.

Intel. VT for Directed I/O (VT-d)

-----------------------------------------------------------------------------------...

Intel. VT for Directed I/O

DMA Control Opt-In Flag

Interrupt Remapping

X2APIC Opt Out

Pre-boot DMA Protection

Server Mgmt

Advanced

Platform Configuration

Socket Configuration

Main

[Enable]

[Disable]

[Auto]

[Disable]

Intel

VT for Directed I/O (VT-d)

Intel. VT for Directed I/O

Enables or disables Intel

Virtualization Technology for Directed I/O (VT-d) by

reporting the I/O device assignment to VMM through DMAR ACPI tables.

DMA Control Opt-In Flag

Enables or disables DMA Control Opt-In Flag.

Interrupt Remapping

Enables or disables Interrupt Remapping.

X2APIC Opt Out

Enables or disables X2APIC mode.

Pre-boot DMA Protection

Enables or disables Pre-boot DMA Protection.

Summary of Contents for NSA7150
























































































































































Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands

Nexcom NSA7150, User Manual

Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands