Nexcom NSA7150 User Manual Download

Page: 125 / 152

109

NSA 7150/7150A User Manual

Chapter 4: BIOS Setup

PCI-E ASPM Support

This option enables or disables ASPM support for all downstream devices.

PCI-E Extended Sync

Enables or disables the PCI-E Extended Sync mode.

PCI-E Detect Wait Time

Configures the option for PCI-E Detect Wait Time.

Compliance Mode

Enables or disables the Compliance Mode.

EOI

Enables or disables EOI.

Fatal Err Over

Enables or disables forced fatal error.

Non-Fatal Err Over

Enables or disables forced non-fatal error.

Corr Err Over

Enables forced correctable error.

ACPI PME Interrupt

Enables or disables ACPI PME Interrupts.

P2P Memory Read

Enables or disables P2P Memory Read.

PME to ACK

Enables or disables PME to ACK messages.

PM ACPI Mode

Enables or disables PM ACPI Mode.

Unsupported Request

Enables or disables unsupported request reporting.

Alternate TxEq

Enables or disables Alternate TxEq.

SRIS

Enables or disables SRIS.

ECRC Generation

Enables or disables ECRC Generation.

ECRC Check

Enables or disables ECRC Checking.

SERRE

Enables or disables SERRE bit.

IODC Configuration

Configures the option for IODC (IO Direct Cache).

Hide Port?

Enables or disables the option to hide the root port.

MCTP

Enables or disables MCTP

Summary of Contents for NSA7150
























































































































































Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands

Nexcom NSA7150, User Manual

Search results

Summary of Contents for NSA7150

Reviews:

Related manuals for NSA7150

Brands by name

Popular brands