Nexcom EBC575 Series Page 1 Manual Download | Manualshive

Page: 1 / 79

background image

1

Copyright

This publication, including all photographs, illustrations and software, is protected under international copy-
right laws, with all rights reserved. No part of this manual maybe reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written consent from NEXCOM International Co., Ltd.
Version 1.0
Copyright 2003

Disclaimer

The information in this document is subject to change without prior notice and does not represent commit-
ment from NEXCOM International Co., LTD. However, users may update their knowledge of any product in
use by constantly checking its manual posted on our website: http://www.nexcom.com. NEXCOM shall not
be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of any
product, nor for any infringements upon the rights of third parties, which may result from such use. Any
implied warranties of merchantability of fitness for any particular purpose is also disclaimed.

Acknowledgements

EBC575 is a trademark of NEXCOM international CO., LTD. All other product names mentioned herein are
registered trademarks of their respective owners.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class A devices and describes how to keep the
system CE compliant.

FEDERAL COMMUNICATIONS COMMISSION (FCC) FOR CLASS A DEVICES

This equipment has been tested and verified to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential area (domestic
environment) is likely to cause harmful interference, in which case the user will be required to correct the
interference (take adequate measures) at their own expense.

CE CERTIFICATION

The product(s) described in this manual complies with all applicable European Union (CE) directives if it has
a CE marking. For computer systems to remain CE compliant, only CE-compliant parts may be used. Main-
taining CE compliance also requires proper cable and cabling techniques.

Preface

1
2
3
...
»

Summary of Contents for EBC575 Series
















































































Reviews:

No comments

Related manuals for EBC575 Series

SBC81206 Series

Brand: AXIOMTEK Pages: 74

TI GE PHY HSMC CARD

Brand: Macnica Pages: 16

DCDC SBC Series

Brand: Infineon Pages: 17

Brand: Supero Pages: 105

Brand: MaxLinear Pages: 25

Brand: MSI Pages: 112

Brand: J&W Pages: 40

Brand: Supermicro Pages: 100

Brand: Intel Pages: 30

975X Platinum Series

Brand: MSI Pages: 157

Brand: Erreka Pages: 4

Brand: HONDA marine Pages: 2

Brand: Zamel Pages: 3

Brand: ST Pages: 14

Brand: AZZA Pages: 43

Desktop Board D845GLVA

Brand: Intel Pages: 72

Brand: Asus Pages: 112

Brand: Asus Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands