Nexcom EBC575 Series, Manual, Page: 25 / 79

25 Chapter 3 EBC575 User’s Manual
3.4 Change CPU
To change the CPU:
1. Pull the handling bar of the socket upward to the other end to loosen the socket’s openings. Carefully lift
the existing CPU up to remove it from the socket.
2. Place the new CPU on the middle of the socket, orienting its beveled corner to line up with the socket’s
beveled corner. Make sure the pins of the CPU fit evenly to the socket openings. Replace the handling bar to
fasten the CPU to the socket.
Figure 3-7: How to Change CPU