manualshive.com logo in svg

Nexcom EBC575 Series, Manual

Share
Download
Nexcom EBC575 Series Manual Download Page 43

43

Chapter 4

EBC575 User’s Manual

4.10 Integrated Peripherals

Figure 4-6: BIOS – Integrated Peripherals

Onboard LAN1/2/3 H/W Active

Enables and disables the onboard LAN modules.

Onboard LAN Boot ROM

Decides whether to invoke the boot ROM of the onboard LAN chip. The available choices are LAN1, LAN2,
LAN3 and Disabled.

On-Chip Primary/Secondary PCI IDE

The system chipset contains a PCI IDE interface with support for an IDE channel. Select Enabled to activate
the primary IDE interface. Select Disabled to deactivate this interface.

IDE Primary/Secondary Master/Slave PIO

The four IDE PIC (Programmable Input/Output) fields let you set a PIC mode (0-1) for each of the four IDE
devices that the onboard IDE interface supports. Modes 0 through 4 provide successively increased
performance. In Auto mode, the system automatically determines the best mode for each device. The choices
are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, and Mode 4.

IDE Primary/Secondary Master/Slave UDMA

Ultra DMA implementation is possible only if your IDE hard drive supports it and the operating environment
includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and your
system software both support Ultra DMA, select Auto to enable BIOS support. The choices are Auto, and
Disabled.

Summary of Contents for EBC575 Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands