connected to the router via an Ethernet cable or a WiFi connection, but I am
unable to connect to the Internet.
To connect to the Internet, you must have an activated 3G/4G card and your service
provider's settings must be properly entered into the router's configuration pages. First,
call your service provider to confirm that your card is activated. If it is, then do the
following: Connect to the router via an Ethernet cable, open a web browser, and enter
"192.168.123.254" into the address bar.
Enter the router's password (default =
admin
) and press Enter. Choose Intefaces and
confirm that the Datacard Is Enabled. Below that, enter your service provider's settings in
the fields provided. Here are some common settings for a number of providers:
Sprint: Dial Number: #777
Verizon: Dial Number: #777
AT&T: APN: isp.cingular
Alltel: Dial Number: #777
Once the correct settings are entered, click “Save”. The router will refresh and return to
the login page. Login and then verify that your settings are correct. You should be able to
access the internet at this point.
31
© NexAira Inc. 2009
