QoS
Quality of Service settings provide a mechanism to provide prioritization of certain types
of traffic over other types of traffic. Disable by default, QoS can be enabled as necessary.
• Downlink and Uplink speeds can be modified for either the Datacard or WAN
connections.
• Prioritization. This section allows for the following choices:
• Set Priority: Low, normal, express, or priority
• Source address: Select from detected sources.
• Target Address: Select detected targets.
• Service: Select Service option.
• P2P: Select Pier-to-Pier protocol.
• Protocol: Select internet protocol.
• Ports: Enter ports.
Note:
After any changes, select ”
Save
” to retain. System will refresh following,
“Save
”.
21
© NexAira Inc. 2009
