Setup Wizard
Select the Setup Wizard Icon. Select the Next button to proceed with the indicated steps
of the automated setup process.
Step One:
Change your administration password. It is recommended that the default
password (admin) be replaced for security reasons. Enter your new password and then
reenter to confirm.
Select
Submit
to retain any changes and move to
Step Two
.
Step Two:
Set up your Internet Connection
A.
3G/4G Internet Connection Setup
a.
During the boot up process of the router all compatible data cards are
recognized and are setup automatically. No additional information is
typically required to complete the setup of your compatible 3G/4G data
card.
b.
If your ISP requires additional information to connect to their network,
please refer to their documentation for APN, PIN Code, Username, and
Password. All data entry fields may not be required to connect to your
ISP's network.
B.
WAN Internet connection.
a.
During the boot up process of the router if your wide area network
(WAN) Ethernet cable is plugged into the WAN port of the router, the
router will automatically be connected to your ISP.
b.
If your ISP requires you to setup the WAN as a PPPoE or PPTP, you will
need to enter your ISP's required information into the proper fields.
i.
PPPoE. Typical entries include the Username and Password
ii.
PPTP. Typical entries include the Username, Password, and the
PPTP Server Name.
9
© NexAira Inc. 2009
