Nexa ZED 2951, Setup Manual

Page: 8 / 33

3.2 Data Transfer Mode
Normal Mode(*) Inventory Mode
Automatic Storage Mode
“ Normal Mode ”:
Data will be uploaded immediately, if data cannot save successfully, scanner will alarm.
“
Automatic Storage Mode
”:
Data will be saved automatically when the distance is exceeded.
Scan the "Upload All Data" bar-code to upload the data when the data need to check.
“ Inventory Mode ”:
Data will be saved automatically.
Scan the "Upload Statistical Data" bar-code when the statistical data need to be viewed or
uploaded.
*Remarks:
Scan the “Upload All Data” to upload the data, then scan the “Clear All Data ” to clear the data
first, otherwise the bar code read last time will be output again.
Clear All Data Upload Statistical Data
( Amount of data )
Upload All Data
*Remarks
“Clear All Data” is only effected under inventory mode.