background image

Thermo Chef Natura can be used in home (or similar 

places such as hotels or restaurants). Thermo 

Chef Natura is conforming with the most advanced 

SAA safety standard. For safety, please read the 

instruction of use carefully before use, especially the 

following aspects: 

Please keep the instruction manual for future 

reference. 

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience 

and knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

•  Children should be supervised to ensure that they 

do not play with the appliance.

•  If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard.

•  Appliances are not intended to be operated by 

means of an external timer or separate remote 

control system.

•  This appliance must not be immersed.

•  The blender is only to be used with the docking 

unit 

 

CAUTION:

 Ensure that the blender is 

switched off before removing it from the 

docking unit. 

•  Switch off the appliance before changing 

accessories or approaching parts which move 

when in use.

•  If the bowl is overfilled, boiling water may be 

ejected.

•  Do not Immerse during cleaning. 

 

CAUTION:

 In order to avoid a hazard due 

to inadvertent resetting of the thermal cut-out, 

this appliance must not be supplied through 

an external switching device, such asa timer, 

or connected to a circuit that is regularly 

switched on and off by the utility.

Risk of Electric Shock

•  Please unplug the application when cleaning

•  Please do not immerse the main body in the 

water or wash it with a great amount of water. 

To be cleaned with wet cloth and avoid water or 

other foreign matter getting into the main body.

•  Regularly inspect the main body, steamer or 

other components for damage. The damaged 

parts will decrease the safety of use. When 

a faulty part is found, please stop use and 

contact New Wave Kitchen Appliances 

customer service department.

•  Thermo Chef Natura can only be repaired 

by the persons appointed by our company. 

Any inappropriate or unauthorized repair will 

cause safety risk. The warranty will be void if 

components from other sources are used. 

Risk of Blade injury

•  Do not touch the edge of the blades. Please 

be careful and hold the top part when you 

reassembly or dismantle the blade.

•  Risk of Projection of High-temp Food

•  The food should not exceed the maximum 

capacity of 2.0L.

•  Pay attention to the capacity mark on the 

blender bowl.

•  Do not open the lid until the food in the bowl 

stops rotating, especially during speed 4 or 

even higher speed.

•  Please do not force the lid to open.

•  When the food in the bowl is of a high-

temperature or boiling, do not use speed 4 or 

greater.

•  Pay attention to high-temperature food when 

opening bowl lid. Please put measuring cup at 

the mouth of bowl lid correctly when processing 

food such as sauce or soup at medium speed 

(3-6) and high speed (7-10).

•  Do not touch the blender bowl when 

processing hot food of more than 60°C.

•  Adopt low speed (1-2) when using steamer in 

order to avoid the liquid projected out at high 

speed.

•  Please put the food processor on a clean, 

stable, flat and cool table especially when 

using steamer.

•  Make sure that steamer and blender bowl are 

connected well when using steamer.

SAFETY NOTES

!

3

Summary of Contents for ThermoChef Natura

































Reviews: