Newwave ThermoChef Natura, Instruction Manual

Page: 20 / 32

INSTRUCTION FOR USE
• Step 4: the temperature can be reset in heating
mode. Note: this step can be chosen or skipped.
Refer to: step 3 in the chapter of “h
adjusting temperatre”
• Step 5: turn off the appliance
H adjusting tempe bl
adjusting
• rotation speed + timing. ( Note: step 1 to 3 are in no
particular order)
• Step 1: choose heating function and set up the
temperature. Refer to: step 1 in the chapter of
“ h adjusting temperature”
• Step 2: timing. Note: this step can be chosen or
skipped. Refer to: the chapter of “timing”
• Step 3: choose blending function and set up
rotation speed. Note: this step can be chosen
or skipped. After the blending button is pressed
down, functional icon “ ” becomes light
instead of flickering which means the temperature
setting button is locked. With blending icon “ ”
flickering on LCD screen, you can adjust the
rotation speed freely by “ ”or “ ”. (There
are 10 rotation speed levels in total, from 1 to 10).
The rotation speed will increase or decrease by
one level each time you press “ ”or “ ”.
The selected rotation speed will flicker on the
display and the default speed is level 1.
• Step 4: start the appliance. After the button “ ”
is pressed down, the appliance starts to work
according to the set rotation speed, temperature
and time. Function icons “ ” and “ ” will
appear together on the LCD screen to show the
heating and blending mode of the appliance.
• Step 5: the heating temperature can be reset in
heating mode. Note: this step can be chosen or
skipped. Refer to: step 1 in the chapter of “ heating
+ adjusting temperature”
• Step 6: rotation speed can be reset in heating
mode.Note: this step can be chosen or skipped.
Rotation speed can be reset in heating mode.
Press the blending button “ ” to have function
icon “ ” flicker on the LCD screen and then set
up the rotation speed freely by pressing “ ” or
“ ”.
• Note:
a) Condition of adjustable rotation speed: the
flickering icon “ ” on the LCD screen means the
rotation speed is allowed to be adjusted by pressing
“ ” or “ ”. To lock the rotation speed setting
function, just press the blending button “ ”again
and its icon will remains light on LCD screen to show
that the rotation speed cannot be adjusted.
b) Condition of nonadjustable rotation speed: if the
icon “ ” doesn’t flicker on LCD, that means
the rotation speed setting function is locked and
inactivated. To activate it, just press the blending
button again. Then “ ” will flicker on LCD to
show that the speed can be adjusted.
c) If the temperature of bowl body exceeds 60℃
with its rotation speed over level 5, the appliance will
change the rotation speed to level 5 for fear that the
liquid in the bowl will splashed out and cause scald
to the people if the speed is over level 5.
• Step 7: turn off the appliance. Refer to: the chapter
of “turn off the appliance”
6. Kneading dough:
Making dough: following the instruction, use separate
function to make dough. Each time make 200 g four
with 120 g water, to operate 2 minutes, rest 1 minute
for next cycle. It can only continuously operate for 5
cycles. After it should be cool down for 1 hour before
use it again. (Note: step 1 and 2 are in no particular
order)
• Step 1: choose Kneading dough function. After the
kneading dough button “ ” is pressed down in
stand-by mode, the functional icon “ ” will flicker
on LCD screen to show the setting of kneading
dough.
• Step 2: timing. Note: this step can be chosen or
skipped. Refer to: the chapter of “timing”
• Step 3: start the appliance. After pressing down the
button “ ”, the appliance/ starts to work according
to the settings. Functional icon “ ” remains
light on LCD screen to show the appliance is in the
condition of kneading dough.
• Step 4: turn off the appliance
Refer to: the chapter of “ turn off the appliance”
. . . .
19