Newwave ThermoChef Natura, Instruction Manual

Page: 21 / 32

INSTRUCTION FOR USE
7. Cooking
(Note: step 1 and 2 are in no particular order)
• Step 1: choose cooking. After pressing cooking
button “ ” in stand-by mode, the functional icons
“ , ” will flicker on LCD screen. Now the
rotation speed ( from 1 to 5) can be chosen by
“ ” or “ ”. The chosen rotation speed will
flicker on the display. The default rotation speed is
level 1.
• Step 2: timing. Note: this step can be chosen or
skipped. Refer to: the chapter of “timing” Step 3:
start the appliance. After pressing down the button
“ ” , the appliance starts to work according to the
settings. Functional icon “ ” remains light on
LCD screen to show the appliance is in the condition
of cooking.
• Step 4: the rotation speed is allowed to be reset
in cooking mode. Note: this step can be chosen or
skipped. The rotation speed is allowed to be reset in
cooking mode. Press the blending button “ ” to
make the icon “ ” flicker on LCD screen, then
the rotation speed can be set up by “ ”
or “ ”.
• Step 5: turn off the applianceRefer to: the chapter of
“turn off the appliance”
8. Turbo boost:
• Step 1: In stand-by mode or Turbo boost mode, if
you press the Turbo boost button and maintain the
pressure, the appliance will get into Turbo boost
mode immediately, blending at the highest speed
of the blade. The icon “ ” will appear on LCD
screen and the working time is accumulated on the
screen in the form of “XX:XX”.
• Step 2: Remove the hand pressing on the Turbo
boost button “ ” , the appliance will stop
blending immediately. The working time is showed
on the screen in the form of “XX:XX” (minute:
second)
9. Electronic scale:
Note: the max load of the weighing plate: 3Kg. Error
code of “E4” will appear if the weight exceeds the max
weight of the scale. The resolution rate of the scale:
4g. If press this button in weighing mode, then the
weight on LCD will clear to zero. Weighing and clearing
to zero of the electronic scale
• Step 1: In stand-by mode, the functional icon “ ”
turns on and “0000” (unit: g) is displayed on the
screen after the electronic scale button “ ” is
pressed.
• Step 2: Put the food on the weighing plate, and the
food weight “XXXX” (unit: g) will be showed on the
screen.
• Step 3: Press the electronic scale button again,
and the weight clears to zero with “0000” (unit: g)
appears on the screen. you can add other food to
the weighing plate whose weight will be showed on
the screen.
• Step 4: Repeat step 3 and you can weigh the
ingredient each time you add to the scale.
10. Local time setting
Time setting
• Step 1: Just after the connection with electricity or no
operation in 30 seconds in stand-by mode, the LCD
screen will display the local time.
• Step 2: Press down “ ” for 2 seconds and the
local time is to be set. Press the “ ” or “ ” to
choose the hour. The time is 24-hour clock.
• Step 3: After the hour is adjusted to be right, press
“ ” to enter into minute setting. Adjust the
minute by “ ” or “ ”.
• Step 4: If the minute is adjusted to be the right one,
then press down the button “ ” to confirm the
local time setting and the appliance return to stand-
by mode.
20