3
Tap “Connect to.”
4
In the list that appears, tap the worksite or computer you want to connect to.
If you tap “Other computer,” a slip appears. Tap the computer you want to
connect to. Only computers that have the Newton Connection Utilities
installed and running appear in the slip.
If you tap “Other worksite,” a slip appears. Enter information about the
worksite, then tap
X
to close the slip.
The type of connection you select is saved and remains set until you
change it.
Establishing a connection
After you select the type of connection, you need to establish a connection
between your Newton device and your computer.
m
Tap Connect.
11
Getting Started
Connection slip for a
serial connection
Tap here to connect.
