Newton Scientific
EVO 10 Centrifuge
|
9
Operating
WARNING
■
Never use the centrifuge if parts of its cover panels are damaged or missing.
■
Never start the centrifuge when the centrifuge door is open.
■
Do not move the centrifuge while it is running.
■
Do not lean on the centrifuge.
■
Do not place anything on top of the centrifuge during a run.
■
Never open the centrifuge door until the rotor has come to a complete stop and this has been
confirmed in the display.
■
The emergency door release may be used in emergencies only to recover the samples from the
centrifuge, e.g. during a power failure (see section
“Mechanical Emergency Door Release” on
page 27
). Do not open the centrifuge, while it is running.
In any case of severe mechanical failure, such as rotor or bucket crash, the centrifuge is not aerosol
tight. In case of rotor failure, the centrifuge can be damaged. Leave the room. Inform technical
support.
Maintenance
WARNING
The centrifuge housing is not to be opened by the operator. For user perform maintenance and care,
refer to page 24.
