58
OPERATOR'S MANUAL
EN
The examination types
provided for “3D” category are:
- DENT: examinations on dentition and surrounding
bone areas
- MAXILLO: examinations on the complete maxillofacial
area
- AIR: specific examinations on respiratory tracts
- SIN: specific examinations on paranasal sinuses
- TMJ: specific examinations on temporomandibular
branches and joints
- EAR: examinations on internal ear
- SPINE: examination on the spine upper part
- MODEL: acquisition of dentition models in plaster,
silicone, resin or other materials typically used in the
dentistry field, or of masks or surgical guides. It is
recommended NOT to select this type of examination
on real patients.
Once the choice has been made, touch NEXT to confirm and go to the next screen
6.2.2. SELECTION OF THE AVAILABLE ANATOMICAL REGIONS FOR 3D EXAMINATIONS
Depending on the circumstances, a reference anatomical
model consistent with the examination field chosen will be
displayed. The DENT case is shown on the side.
The screen shows the anatomical model in the two Front
and Lateral views.
The central box identifies the field of view (FOV) and its
position with respect to the anatomical model. By touching
a point of the model or dragging the box, it is possible to
position the FOV in a specific point and evaluate the
dimensions with respect to anatomies.
TO change the FOV size, touch the “+” and “
-
” symbols to
enlarge/reduce the diameter and increase/decrease the
cylindrical FOV height.
The box dimensions are modified accordingly and it can
be repositioned.
The size of the chosen FOV is displayed, as well as the
maximum possible extension achievable.
Once the FOV and its position have been chosen, touch NEXT to confirm and go to the next screen
