30
OPERATOR'S MANUAL
EN
4.5. PERFORM A SIMULATION (DUMMY RUN)
Perform the following operations to move the equipment. The operator must:
- Supervise the patient closely and, in case of risk of impact between the equipment and the patient, stop
the movement immediately by releasing the control button.
- Prevent the patient from assuming incorrect positions (introduction of hands or other body parts in
inappropriate areas) or from moving away from the examination area.
To perform a simulation cycle, a simulation of the selected projection mode or program, without emitting radiations
(dummy run), keep the button
(CONFIRMATION) pressed.
When the status LED is green, namely when the machine is in the Ready status (READY).
This button must be kept pressed for all the cycle interval, otherwise the movement will stop.
This simulation can be useful for patients who are particularly emotional, children, showing the patient what
the examination consists of, without having to leave him/her alone inside the room.
4.6. PARKING POSITION
To take the machine to parking position, which can be set upon request, the (CONFIRMATION) key must be held
depressed for a long time until the status LED turns light blue.
Once this operation is over, the device will enter the standby status (Standby).
This procedure can be carried out only when the machine is on and the status LED is blue.
Running this procedure will also allow reducing the machine footprint inside the installation room.
