EN
OPERATOR'S MANUAL
27
4. CONTROL PANEL
4.1. CONTROL PANEL ONBOARD THE MACHINE
Control panel area
Button
Description and use
Confirmation Button
Column Upward Movement
Column Downward Movement
Vertical Laser Positioning (forward) for 2D projections
Craniostat movement (upward) for 3D projections
Vertical Laser Positioning (backward) for 2D projections
Craniostat movement (downward) for 3D projections
The control panel allows the user to select the settings necessary upon the examination start, thus to select the
EXAMINATION to be carried out and view the state information.
The machine features a membrane control panel composed of five buttons which allow moving X-ray device parts
(column, chin rest, laser traces) used for Patient positioning.
The control panel features two LED lights which indicate the state of the system:
If the X-ray device is on, the left LED is blue. If the X-ray device is in pause mode
(Standby), the LED flashes.
A Green LED steadily on indicates that the X-ray device is ready for the X-ray emission,
hereinafter referred to as “Ready status”: if pressed, the remote X
-ray button makes the
X-ray examination start.
If instead the Green LED flashes, it means that the devices is connected to an
INTERLOCK switch that signals to the machine that the access door of the radiology
room is open; in this case, the Ready status is only potential, since X-ray emission will be
activated only after the door is closed. Should the remote X-ray emission button be
pressed, the display will show an error message (see the section Error messages).
The Yellow LED on the right lights up when an X-ray emission is in progress.
