NewTek TimeWarp TW-4, User Manual, Page: 47 / 126

Page | 39
suitable Ethernet cable. In most cases you will wish to use a switch or router rather than
a direct connection between the two devices, so TriCaster can also connect to the
Internet, etc.
4. Power up TriCaster, and wait for the Start screen to appear; then press the POWER
button on the control surface.
AVID symbols briefly appear on the OLED display above each fader at this point. When
EuControl recognizes the control surface, the display shows rectangles in place of the logo
icons to tell you the control surface is in a ‘ready’ state.
Connectivity Notes : If the control surface OLED display continues to show the AVID symbols,
this indicates it has not been detected by EuControl. You can try simply turning the Artist
Control power switch off and then on again. If this does not help, power Artist Mix off,
restart TriCaster, and turn the surface on again. If Artist Mix is still not recognized at this
point, double check your connections. Also, when more than one TriCaster is connected to the
network make sure each one has a unique system name.
If this fails (or for complex installations, such as when multiple TriCasters or Artist Mix devices
are on the same network) you may need to Exit to Windows and use the configuration tools
the EuControl application provides in its interface. Right-click the EuControl icon (E) shown in
the Notification Area of the Windows taskbar to access these controls, and then select
EuControl Settings. Refer to the AVID® documentation for further details.
5. Launch a TriCaster session. The OLED rectangle icons are replaced by custom TriCaster
audio control labels and displays.
4.3 GETTING STARTED
When you first connect it to your TriCaster and open a TriCaster session, Artist Mix is
automatically configured to TriCaster’s default
Audio Mixer setup. The OLED information display
will look like Figure 29.
Figure 29