NewTek TimeWarp TW-4, User Manual, Page: 102 / 126

Page | 94
TW-42 N
OTES
There is no corresponding DDR 1/DDR 2 button on TW-42. Multi-delegating DDRs is
not supported with this control surface.
7.2.3 EDIT GROUP
Figure 83
In general, these buttons operate on selected playlist content in the
currently delegated
DDR (see Section 7.2.2).

Remove – Push to remove currently selected entries from the
delegated DDR ’s playlist (selected items are not deleted from the
hard drive, however).
TW-42 N
OTES
The Remove button is labeled RMV on TW-42.

Copy – Push to copy currently selected playlist items into the Paste buffer.

Paste – Push to insert Paste buffer content into the playlist of the delegated DDR

Esc – close any popup dialog or text entry item.
Hint: These four buttons are also ‘action buttons’ – that is, pushing one of them has an immediate
effect (but unlike a radio button, the operation is complete on release, and does not remain in
force).
TW-42 N
OTES
There are no Copy, Paste or Esc buttons on TW-42.
7.2.4 PLAY SPEED
As you would expect, the speed preset buttons in this group (marked 25%, 33%, 50%, 75% and
100%) govern the playback rate of the active DDR .
Speed preset buttons are mutually exclusive, and establish a playback mode. They do not initiate
playback; rather, the playback speed you choose is applied when subsequently press Play .