NewTek TimeWarp TW-4, User Manual, Page: 103 / 126

Page | 95
(If a DDR is already playing, pushing a speed preset
button alters the current playback speed
immediately.)
Hint: If you use an onscreen speed control to change to a new playback speed, the control surface
button selection state follows when possible (in cases where no button corresponds exactly to the
newly established speed, no preset button will be illuminated).
The speed T-Bar works in similar fashion to the preset buttons, but provides a smoothly variable
approach to setting playback speed.
TW-42 N
OTES
There is no Speed T-bar on TW-42.
7.2.5 MARKING GROUP
The IN and OUT buttons in this group allow you to indicate the In points
and O ut points for events you wish to record for later replay.
Figure 84
Figure 85