NewTek TimeWarp TW-4, User Manual, Page: 18 / 126

Page | 10
9. Click the BKGD delegate button in the MAIN TRANSITION> DELEGATE control group .
10. Twist the Select knob below (next to Fade ) to cycle through the current entries in the
BKGD Transition Bin .
11. Click the DSK 1 button in the MAIN TRANSITION> DELEGATE control group .
12. Again, twist the Select knob, and choose a different transition for DSK 1 – choose one
that is in a different numeric place in the bin than the BKGD selection below.
13. Now press the BKGD and DSK 1 delegate buttons together, multi-selecting them.
14. Twist Select again, slowly, click by click – the selections advance together.
15. Rotate the nearby Rate knob (just above the main Auto button), and keep an eye on the
Transition Duration time displays in the Live Desktop . Observe that the transition
duration for both delegates changes as you do so.
16. Now push the Rate knob a few times (as though it was a button). As you do so, watch
the Transition speed of both selected delegates in the user interface. The settings will
cycle through the presets (in the Speed menu) each time you press Rate .
17. In the user interface, open the Duration menu for the BKGD layer so you can see the
state of the Reverse option for the transition.
18. Push the Select knob (as though it was a button). Doing so toggles the Reverse
transition mode for this transition; you’ll be able to see this in the menu you opened .
19. Open the Transition Speed menu for the BKGD layer on the Live Desktop .
20. Locate the SHIFT , CTRL and ALT buttons, to the left of the MAIN TRANSITION control
group. Press ALT and continue to hold it down, and the watch the menu as you push
Select several times in succession. You should see the Ping Pong switch for the current
BKGD transition toggle on or off each time you push Select .