background image

 

      NewTek, Inc.                                                                                www.newtek.com 

 

Connect Spark: NC1S-HDMI-3G 
 
 

User Manual 

7

 

decoder will be disconnected), this process takes about three seconds.   

 

3.5

 

Decoder/video decoder software connect the encoder 

 

The encoder uses the standard of RTSP Media Transfer Protocol to transmit 

the encoded video and audio, the products which support the standard RTSP 

transport protocol and which support H.264 decoding (such as the company's 

KV-DC series decoders, PC client software) all can be connected to the 

encoder device and obtain the encoded video and audio. 

How does the RTSP of encoder visit URL: 

 

Main streaming: 

rtsp://<encoder address>/ch01 

(For example

rtsp://192.168.1.168/ch01) Secondary streaming

 

rtsp://< encoder address >/sub01 

(For example

rtsp://192.168.1.168/sub01) 

ch01, sub01 is RTSP session ID (Session ID). 

If the encoder involves firewall / NAT traversal issues, please refer to 7.8 firewall 

/ NAT traversal setup instructions. If the encoder set the mapping on the firewall 

/ NAT port, then the RTSP of encoder access URL is: 

Main streaming: 

rtsp://<firewall/NAT device’s public network address>:<RTSP mapping 

port>/ch01 

      (for example

rtsp://211.0.0.1:554/ch01) 

Sub streaming: 

rtsp://<firewall/NAT device’s public network address>:<RTSP mapping 

port>/sub01 

(for example

rtsp://211.0.0.1:554/sub01) 

Summary of Contents for NC1S-HDMI-3G















Reviews: