NewTek, Inc. www.newtek.com
Connect Spark: NC1S-HDMI-3G
User Manual
8
RTSP supports media capture, parameter setting and PTZ remote control.
3.6
Restore factory settings
Restore factory settings two methods:
1. Via the WEB interface, "Basic Setup > restore factory settings" function;
2. Through RESET button:
Pressing on RESET button for 3 seconds, device will restore factory settings.
Restoring factory setting will lead to the device hard restart, restarting course
will last 1 minute.
After restoring factory settings, below parameters will be changed as default
value:
* Log in will be still as admin;
* Network address capture way is restored as manual capture;
* IP address will be still 192.168.1.168, subnet mask will be 255.255.255.0;
* All video, audio encoding parameters will be restored as default value;
* RTSP setting will be restored as default value.
lick on the “Delete user” icon“
”in user interface list, you can delete the user.
3.7
Firmware upgrading
The encoder supports online firmware upgrade
，
use for updating the software
version .
Via the WEB management interface,
"Basic Setup> update
firmware/software"
, you can online upload the firmware upgrade file which
provide by the manufacturer.
