35
/
63
Modem Web Interface
MDM2200
User Manual MDM2200 R3.2 v1.1
4.7.2.2 The Parameters of the Satellite Interface
The displayed parameters and their descriptions are shown in the table below.
Parameter
Description
General
Configured
Beam ID
Identifier of the beam in which the terminal currently operates.
Beam ID
Identifier of the beam whose parameters are displayed in the GUI.
Satellite Properties
Polarization
Skew
Skew angle in degrees applied by the satellite operator. Check with your
satellite operator to know this value.
Value is a positive or negative integer with dotted decimal notation.
Orbital Position
Orbital position of the satellite in degrees and East/West selection.
Satellite Latitude
Variance
Only applicable in case of automatic pointing.
Value which is typically used for inclined orbit satellites. Check with your
satellite operator to know this value.
Max Skew
The maximum skew angle.
Check with your satellite operator to know this value.
TX Polarization
Reflects the polarization of the received carrier.
Possible values are:
•
Horizontal
•
Vertical
•
Circular Left
•
Circular Right
Extra Hunt
Parameters
Future use
Initial Receive Carrier
Default
Marker for the default Initial Receive Carrier.
Transport Mode
•
DVB-S
•
DVB-S2 (CCM)
•
DVB-S2 (ACM)
Frequency
Initial receive frequency (GHz)
Symbol Rate
Initial receive symbol rate (Mbaud)
Polarization
Reflects the polarization of the received carrier. Possible values are:
•
Horizontal
•
Vertical
•
Circular Left
•
Circular Right
Pointing Carrier
Default
Marker for the default pointing carrier
