19
/
63
Modem Web Interface
MDM2200
User Manual MDM2200 R3.2 v1.1
4.6.4 Pointing the Antenna
Before proceeding with this step, make sure that:
•
Your antenna and iLNB are properly installed. For instructions, refer to the
Installation Guide provided with your terminal.
•
The RX interface of the iLNB is connected to the RX interface on the modem.
Note: The TX interfaces should not yet be connected.
»
If two pointing carriers have been preconfigured, keep the pre-selected carrier. If pointing fails
during the procedure, you will need to repeat this step with the other pointing carrier.
»
Click
Start Pointing
to start the pointing procedure with the Point&Play tool and proceed to the
next section: Using the Point&Play Tool.
»
Click
Skip Pointing
to skip the pointing procedure (use if the antenna is already correctly
pointed). You can proceed to
Software Download on page 23
.
