7 |
P a g e
2.3 Dimensions and Mounting
The ZW-REC includes all required hardware for mounting. To mount the ZW-REC position unit
where required. Mark the location of the top center of the unit. Mark and drill the two screw holes as
indicated in the diagram below. Use the included drywall anchors if needed and mount the bracket so
that the bracket clips are facing up. Align the back of the unit over the three clips. When engaged slide
downward and snap the unit in place.
When mounting the unit be sure to leave room on the top for the Antenna and on the bottom
and side for the cables.
Mount the unit away from any large metal obstructions such as posts, catwalks, or large
machinery.
For best wireless range do not co-locate the ZW-REC with other 2.4GHz wireless equipment
such as wireless routers or access points.
For best wireless range elevate the ZW-REC and keep a direct line of sight to End Devices.
Figure 4 - Mounting Bracket Installation
Summary of Contents for zW Series
Page 1: ...zW Series Wireless Receiver zW REC ...
Page 16: ...MQS5546 N 0516 ...