11 |
P a g e
Energy Scan and RF Channel Selection
On initial start up the ZW-REC will scan for the
wireless channel with the least traffic. This channel will
appear in the Channel box. If you would like to select a
specific wireless channel you can use the pull down
menu to select the channel you would like.
To have the ZW-REC save the wireless channel as
the default uncheck the “Energy Scan at Startup” box.
This will stop the ZW-REC from doing an energy scan
again. If using older End Devices such as zSeries End
Devices it is recommended you disable the energy scan
now.
Once you have made any required changes press
the
Save
button to save your settings. Your new
settings will require a reset to take effect. Press the
Radio Reset
button to enable your new RF Channel.
Older End Devices may need to be reset if the RF
Channel has been changed. Please refer to the user
manual for your End Device for more information.
3.7 Readings Page
The Readings page allows you to view the current sensor data from all connected End Devices.
Before the ZW-REC connects to any End Devices, it will show an initial page without and readings as
pictured below.
At this point configure any End Devices you have. Confirm that all End Devices are set to the same
Network ID as the desired ZW-REC. Also ensure each End Device has a different Device ID selected. If
an End Device is running it needs to be reset after changes to the Device ID or Network ID. Power on all
End Devices now. If you have existing End Devices you may need to reset them at this time.
Please refer to the user manual for your End Device for detailed instructions on setting Network IDs
and Device IDs.
When an End Device turns on it will enter active scan mode and search for a receiver. When your
ZW-REC is found the Wireless Link Indicator on your End Device will flash once. The Link Indicator will
flash again each time a reading is transmitted. Now your End Device should be accessible in the
Readings web page.
Figure 7 – Configuration Page
Figure 8 – Readings Page (Blank)
Summary of Contents for zW Series
Page 1: ...zW Series Wireless Receiver zW REC ...
Page 16: ...MQS5546 N 0516 ...
