Newport zW Series, Quick Start Manual

Page: 4 / 16

3 | P a g e
PART 1: INTRODUCTION
1.1 Safety and EMC Considerations
Refer to the Environment/Operating Conditions Section.
ESD Warning:
Warning:
The following parts of the unit are ESD sensitive:
 The Antenna
 Metal connectors for the Antenna, USB Port, and Power
EMC Considerations:
 Whenever EMC is an issue, always use shielded cables.
 Never run signal and power wires in the same conduit.
 Use twisted-pair wires for differential signal connections.
 Install Ferrite Bead(s) on signal wires close to the instrument if EMC problems persist.
 Failure to follow all instructions and warnings may result in injury!
1.2 Before You Begin
Inspecting Your Shipment:
Remove the packing slip and verify that you have received everything listed. Inspect the container
and equipment for signs of damage as soon as you receive the shipment. Note any evidence of rough
handling in transit. Immediately report any damage to the shipping agent. The carrier will not honor
damage claims unless all shipping material is saved for inspection. After examining and removing the
contents, save the packing material and carton in the event reshipment is necessary.
Customer Service:
If you need assistance, please contact the Customer Service Department nearest you.
Manuals / Software:
For the complete product manual and additional software please visit the website listed on the front
cover.
1.3 Included with Your ZW-REC
 ZW-REC Wireless Receiver
 Universal AC Adaptor with US, EU and GB prongs
 Mounting Kit including screws, anchors, mounting bracket and feet.
Figure 1: ZW-REC Included Items