Newport Pt16, Operator'S Manual

Page: 22 / 72

PLATINUM Series Controllers User’s Guide
22 Complete Menu Structure
Level
2
Level
3
Level
4
Level
5
Level
6
Notes
AUto StRt Initiates autotune after StRt confirmation
GAIN _P_ ____ Manual Proportional Band setting
_I_ ____ Manual Integral Factor setting
_d_ ____ Manual Derivative Factor setting
%Lo ____ Low clamping limit for Pulse, Analog Outputs
%HI ____ High clamping limit for Pulse, Analog Outputs
AdPt ENbL Enable fuzzy logic adaptive tuning
dSbL Disable fuzzy logic adaptive tuning
RM.SP oFF Use SP1, not remote Setpoint
oN 4–20 Remote analog Input sets SP1; range: 4–20 mA
Note: This submenu is the same for all RM.SP ranges.
RS.Lo ____ Min Setpoint for scaled range
IN.Lo ____ Input value for RS.Lo
RS.HI ____ Max Setpoint for scaled range
IN.HI ____ Input value for RS.HI
0–24 0–24 mA
0–10 0–10 V
0–1 0–1 V
M.RMP R.CtL No Multi-Ramp/Soak Mode off
yES Multi-Ramp/Soak Mode on
RMt M.RMP on, start with digital input
S.PRG ____ Select program (number for M.RMP program), options 1–99
M.tRk RAMP Guaranteed Ramp: soak pnt must be reached in ramp time
SoAk Guaranteed Soak: soak time always preserved
CYCL Guaranteed Cycle: ramp can extend but cycle time can’t
Note: tIM.F does not appear for 6 digit display that use a HH:MM:SS format
tIM.F MM:SS “Minutes : Seconds” default time format for R/S programs
HH:MM “Hours : Minutes” default time format for R/S programs
E.ACt StOP Stop running at the end of the program
HOLd Continue to hold at the last soak setpoint at program end
LINk ____ Start the specified ramp & soak program at program end
N.SEG ____ 1 to 8 Ramp/Soak segments (8 each, 16 total)
S.SEG ____ Select segment number to edit, entry replaces # below
MRt.# ____ Time for Ramp number, default = 10
MRE.# oFF Ramp events on for this segment
oN Ramp events off for this segment
MSP.# ____ Setpoint value for Soak number
MSt.# ____ Time for Soak number, default = 10
MSE.# oFF Soak events off for this segment