NewMar Phase Three PT-CE Series Installation & Operation Manual Download Page 1

INSTALLATION/OPERATION MANUAL

PT-CE SERIES

Models:

PT-20CE, PT-40CE, PT-70CE

PT-24-20CE, PT-24-35CE

USA Headquarters:

 P.O. Box 1306 • Newport Beach, CA 92663 • Phone: 714-751-0488 • Fax: 714-957-1621

Shipping: 2911 W. Garry Ave., Santa Ana CA 92704

e-mail: [email protected]

Euro Warehouse:

 Holland • Phone: +31-35-603-2494 • Fax: +31-35-603-2149

e-mail:  [email protected]

THREE STAGE SMART CHARGER/

DC POWER SUPPLY

LIMITED WARRANTY

NEWMAR warrants with the original purchase of products sold by NEWMAR, that they shall be
free from defects in material and workmanship for two years from the date of purchase.

In the event of a product failure caused by defect of material or workmanship you must return the
entire product with the original packing if possible, freight pre-paid, to the place of purchase or to
NEWMAR, 2911 W. Garry Avenue, Santa Ana, California 92704. Besides paying to send back the
product, you must include proof of purchase reflecting where the product was purchased, the date
of purchase and a written explanation of the alleged defect. If this product is determined to be
defective by NEWMAR, we will repair the product and ship it back to you without charge. If non-
repairable within 30 days, we will ship an equivalent or better replacement product or provide you
with a refund of your purchase price.

Repairs or adjustments to be made on the defective product shall be determined by NEWMAR in
its sole discretion. If you have any questions concerning this Limited Warranty, contact us at the
above address or call Customer Service at 1-800-854-3906.

This Limited Warranty does not apply to products that have not been installed properly or maintained
adequately. This Limited Warranty does not apply to damage through accident, negligence, misuse,
abuse or normal wear and tear. Further, this warranty does not cover products that have been
altered or modified from their original sale condition. For information regarding proper installation,
please consult the instructions enclosed with the product. You may contact NEWMAR or an
authorized retailer for additional installation instructions. It is your responsibility to check the product
upon receipt for any damage during shipping and to contact the carrier or shipper regarding such
damage. No person including any NEWMAR dealer, is authorized to assume any further liability
for NEWMAR beyond this Limited Warranty, in connection with the products sold by NEWMAR.  A
customer’s sole and exclusive recourse against NEWMAR is this Limited Warranty, regardless of
a customer’s recourse against a seller.

THERE ARE NO OTHER WARRANTIES  EXPRESS OR IMPLIED WHICH EXIST BEYOND THE
TERMS OF THIS LIMITED WARRANTY. THIS LIMITED WARRANTY IS NEWMAR’S SOLE
OBLIGATION TO YOU FOR THIS PRODUCT AND CONSTITUTES YOUR EXCLUSIVE REMEDY
UNDER THE LAW. NEWMAR SHALL NOT BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR INDIRECT DAMAGES CAUSED AS A RESULT OF ANY DEFECT IN
WORKMANSHIP, REPAIR OR MATERIAL WORKMANSHIP REPAIR OR REPLACEMENT OF
THIS PRODUCT. NEWMAR IS NOT RESPONSIBLE FOR ANY DAMAGE THIS PRODUCT
CAUSES TO ANY OTHER EQUIPMENT OR ANY OTHER PRODUCT.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you. Also some states do not allow the exclusional limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. Finally, this
warranty gives you specific legal rights; however, you may also have other rights which vary from
state to state.

M-PT-CE-F

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for Phase Three PT-CE Series

















Reviews: