NewLine TC-51D, Manual

Page: 25 / 28

- 24 -
Trouble Shooting
Check the solutions below if you are having trouble using the Visualizer :
Problem Possible causes Solutions
The device does
not turn on in
normal condition. The power adapter is not connected
correctly to the device or the power
socket. Make sure the power adapter is
connected correctly to the device and
power socket.
The device is
unable to capture
images or record
videos.
The SD card is protected. Reset the SD card to be writable.
After the device is
connected,there
is no image
output.
The device is not connected to the
external equipment correctly. Re-connect the device with the
external equipment.
The external equipment is not
selected correctly.
Select the correct external equipment.
The resolution of the external
equipment is set incorrectly. Reset the resolution of the external
equipment.
The device is not switched to the
correct source of signals.
Switch to the correct source of signals.
The computer transfer key (VGA) is
activated.
Press the source of signal (CAM).
HDMI is activated. Press the source of signal (CAM).
The image can
not be moved
around. The image can not be moved around
because the Freeze function of the
device is activated. Press again the Freeze function key
on the control panel or the remote
control to de-activate the function.
The remote
control
does not
respond.
The battery runs out.
Please replace with 2 new AAA
batteries.
Objects are located between the
remote control and the device and
block the communication signals.
Please remove the objects that block
the communication signals.
The distance between the remote
control and the device is too far. Please shorten the distance between
the remote control and the device.
Switch to HDMI
IN1 signal without
audio output
1.The Visualizer connect multi- audio
equipments.
2.The OS of PC connect to Visualizer
is WIN7 or below.
1.Set PC graphics card to be the
audio output equipment.
2.Switch the playing file to next.