NewLine TC-51D, Manual

Page: 23 / 28

- 22 -
Connect the Visualizer to a computer with a RS232 cable (Please disconnect the projector
from the RS232 port first) and select the Baud Rate and Parity based on the projector's
Baud Rate, then click the "TEST" button to pop up the Projector Code Test dialog box, input
the Baud Rate and Parity based on the projector's Baud rate, then click "Open".
Click the projector control buttons on the Visualizer's operating panel to check if the control
code that the program received is the same as the sending code. If the receiving code is
same to the sending code, the input codes are correct. If the Visualizer can not control the
projector, please do the following.
1.Check to see if the source control codes of projector are correct.
2.Check to make sure the connection between the Visualizer and the projector is correct.