**
【
Enter Setup
】
【
Exit Setup
】
118
Parity Check
A check digit is optional for Standard 25 and can be added as the last digit. It is a calculated value used to verify the
accuracy of the data. By default, the scanner does not run parity check.
No Parity Check:
The scanner transmits Standard 25 barcodes as is.
Do Not Transmit Check Digit After Parity Check:
The scanner will run a parity check using the last digit of
Standard 25 barcode as check digit. Barcodes passing the check will be transmitted except the last digit, whereas
those failing it will not be transmitted.
Transmit Check Digit After Parity Check:
The scanner will run a parity check using the last digit of Standard 25
barcode as check digit. Barcodes passing the check will be transmitted, whereas those failing it will not be
transmitted.
**
【
No Parity Check
】
【
Transmit Check Digit After Parity Check
】
【
Do Not Transmit Check Digit After Parity Check
】
Note:
If the
Do Not Transmit Check Digit After Parity Check
option is enabled, Standard 25 barcodes with a length
that is less than the configured minimum length after having the check digit excluded will not be decoded. (For example,
when the
Do Not Transmit Check Digit After Parity Check
option is enabled and the minimum length is set to 4,
Standard 25 barcodes with a total length of 4 characters including the check digit cannot be read.)
Summary of Contents for NLS-HR1550-3E
