**
【
Enter Setup
】
【
Exit Setup
】
62
Set Length Range for Code 128
The scanner can be configured to only decode Code 128 barcodes with lengths that fall between (inclusive) the
minimum and maximum lengths. To accomplish it, you need to set the minimum and maximum lengths.
Both lengths can range from 1 to 255 characters. If minimum length is set to be greater than maximum length, the
scanner only decodes Code 128 barcodes with either the minimum or maximum length. If minimum length is same as
maximum length, only Code 128 barcodes with that length are to be decoded. The default minimum and maximum
lengths are 1 character and 255 characters respectively.
【
Set the Minimum Length
】
【
Set the Maximum Length
】
Example: Set the scanner to decode Code128 barcodes containing between 8 and 12 characters
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode.
3. Scan the numeric
barcode “8”. (See the “
Digit Barcodes
” section in Chapter 7)
4. Scan the
Save
barcode. (
See the “
Save/Cancel Barcodes
” section in Chapter 7)
5. Scan the
Set the Maximum Length
barcode.
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the
Save
barcode.
8. Scan the
Exit Setup
barcode.
Summary of Contents for NLS-HR1550-3E
