Newland NLS-HR1550-3E User Manual Download Page 110

Page: 110 / 178

【

Enter Setup

】

【

Exit Setup

】

100

Deutsche 14

Restore Default Settings

Scan the barcode below to restore all parameters in Deutsche14 configuration to the factory default settings. To find the

related default settings, see the “

Default Parameters Table

” section in Chapter 7.

【

Restore the Default Settings of Deutsche14

】

Enable/Disable Deutsche14

Deutsche14 is disabled by default.

【

Enable Deutsche14 But Do Not Transmit Check Digit

】

【

Disable Deutsche14

】

【

Enable Deutsche14 and Transmit Check Digit

】

Note:

It is advised not to enable Deutsche 14 unless necessary, because Deutsche 14, ITF-14 and Interleaved 2 of 5

use the same encoding method and enabling them at the same time can easily cause confusion with each other when

decoding.

Summary of Contents for NLS-HR1550-3E



















































































































































































Search results

Summary of Contents for NLS-HR1550-3E

Reviews:

Newland NLS-HR1550-3E, User Manual, Page: 110 / 178

Search results

Summary of Contents for NLS-HR1550-3E

Reviews: