Symbologies
nlscan.com
Page 82
Code Programming ON
Code Programming OFF
Tools
"Code Programming ON"
1.
"Select Min Message Length"
2.
Digit code "8", see Digit Code
3.
"Save Programming", see Digit Code
4.
"Select Max Message Length"
5.
Digit code "1"
6.
Digit code "2"
7.
"Save Programming"
8.
"Code Programming OFF"
9.
Aztec Code
Select Message Length
It is used to program the valid reading length (bytes) of Aztec. The engine will produce an error
beep, if the data length captured does not match the valid reading length.
Aztec Message Length is defined by "Min. Message Length" and "Max. Message Length".
Min Message Length
（
default: 1
）
【
Pro CMD
：
0503030
】
Max Message Length
（
default:3832
）
【
Pro CMD
：
0503040
】
2D bar code Message Length should not exceed 65535 bytes.
Max Message Length should not be shorter than Min Message Length.
To read a fixed length Aztec, Please program Max & Min Message Length to the same value.
Program Aztec, Min Message Length 8 bytes, Max Message Length 12 bytes.
