Newland NLS-EM2045 Series, User Manual

Page: 48 / 140

Enter Setup
**
Exit Setup 36
Restore All Default Code IDs
For the information of default Code IDs, see the Appendix 3: Code ID Table .
Restore All Default Code IDs
Modify Code ID
Code ID of each symbology can be programmed separately. See the following example to learn how to
program a Code ID.
Example: Set the Code ID of PDF417 to
“p”
1. Check the hex value of
“p” in the
Appendix 4: ASCII Table . (
“p”: 70)
2. Scan the Enter Setup barcode.
3. Scan the Modify PDF417 Code ID barcode.
4. Scan the numeric
barcodes “7” and “0”. (See the
Appendix 10: Digit Barcodes )
5. Scan the Save barcode. (See the Appendix 11: Save/Cancel Barcodes )
6. Scan the Exit Setup barcode.